Enter Order Line - Subassembly

Use this option to inquire on or maintain the contents of a sub-assembly. This menu option is only enabled if the item being sold is a sub-assembly.

1. Display the Enter Order Line screen.

Refer to "Entering MRF Order Lines".

2. Select SUBASSEMBLY.

Micronet displays the Sub Assemblies screen.

3. If you want to:

• add an item to the sub-assembly, select the Add button
• delete an item from the sub-assembly, select the item then select the Delete button
• edit the details of an item in the sub-assembly, double click on an item or select an item then press Enter.

If you selected to add or edit an item, Micronet displays the Enter STL Order Line screen. This is an abbreviated version of the Enter Order Line screen.

4. Add or enter the item details as required.

Refer to "Entering MRF Order Lines" for more information about this screen.

5. When you have finished adding or maintaining the item details, select the Accept button.

If you added an item to the sub-assembly, Micronet redisplays the Enter STL Order Line screen so you can add further items to the sub-assembly.

6. When you have finished adding items to the sub-assembly, select the Cancel button.

Micronet redisplays the Sub Assemblies screen listing the items you added.

7. When all the items in the sub-assembly are displayed on the Sub Assemblies screen, select Ok.

Micronet redisplays the Enter Order Line screen.